快人一步 穩奪先機| 六面數控鉆孔中心DN-612MR
發布時間：
2022-07-05
核心亮點 控制系統升級 Control System Upgrade 采用EtherCAT總線控制系統,微秒級響應速度。 Applies EtherCAT bus control, microsecond response speed.
核心亮點
控制系統升級
Control System Upgrade
采用EtherCAT總線控制系統,微秒級響應速度。
Applies EtherCAT bus control, microsecond response speed.
軟件技術升級
Software Upgrade
多線程同步運行,優化機構動作協調,高效穩定運行鉆孔加工。
Multithread and synchronous run as well as optimization of motioncoordination make drilling in more efficiency and stability.
抓手最高速度135m/min
Clamps Max.Moving Speed 135 m/min
快速定位加工,提高加工效率。.
Fast positioning for drilling improves efficiency.coordination make drilling in more efficiency and stability.
小板加工
Dilling on Small Boards
滿足多種小板加工工藝需求
Satisfy drilling on small boards.coordination make drilling in more efficiency and stability.
最小加工板件70* 35mm
Min.workpiece size: 70* 35mm
新版本軟件功能更全面
New Version Software with Comprehensive Functions
最優鉆孔路徑設計,高效加工。
Optimal diling path makes machining in high eficiency.
加工記錄實時統計。
Real-time statistics of machining records.
配置特點
雙抓手長導軌機架
Long Clamp Stroke Equipped
抓手導軌5500mm,長板件可一次抓料完成加工;
減少換手次數,提高加工效率,主要結構件經過退火處理。
Clamp Stroke: 5500mm, One-time feeding and machining with 2800mmlong panel, reducing times in clamp changes and improving drilling efficiency.
鉆孔轉速變頻控制
Dilling Speed Controlled by Inverter
根據孔徑大小快速切換鉆孔轉速,提高鉆孔質量,減少爆邊。
Fast change diling speed according to holes diameter, improving dillingquality and reducing burst on panel edge.long panel, reducing times in clamp changes and improving drilling efficiency.
配置增壓系統
Pressurization System Configured
提高鉆孔氣壓,保證鉆孔深度一致, 提高鉆孔效率。
Increase the drilling pressure, ensures Hole- depth consistent,and improves drilling efficiency.long panel, reducing times in clamp changes and improving drilling efficiency.
抓手自清潔系統(專利技術)
Clamps with Self-cleaning System (Patented)
清理板件表面灰塵，提高加工精度。
Clean off dust on panel surface, and improves milling accuracy.
移動氣浮工作臺(專利技術)
Air-float Worktable (Patented)
智能支撐鉆孔,提高鉆孔精度,減少板件刮傷及撞板現象。
Intelligently support drilling machining, improves drilling accuracy,reduce panel scratches and hit against.
絕對值伺服總線控制系統
Absolute Value Servo Bus Control System
開機無需回到原點操作,上電即用。
No need for homing, and machine can be used immediately power on.reduce panel scratches and hit against.
兼容多種數據對接格式
Compatible with Multiple Data Formats
計算機操作,便捷高效。
Convenient and efficient operation.reduce panel scratches and hit against.
技術參數
|
型號 Model |
DN-612MR |
|
工件長度 Panel Lenght（mm） |
70-2800 |
|
工件寬度 Panel Width（mm） |
35-1200 |
|
工件厚度 Panel Thickness（mm） |
9-60 |
|
抓手最大速度 Max Speed of Gripper（m/min） |
135 |
|
Y/Z軸最大速度 Max Speed of Y/Z-Axis（m/min） |
75/30 |
|
刀具數量 Number of Drills |
上垂直鉆12V+水平鉆8H+下垂直鉆9V |
|
主軸功率 Power of Spindle（kW） |
2*3.5 |
|
總功率 Total Power（kW） |
20.65 |
|
外形尺寸 長*寬*高 Overall Size L*W*H（mm） |
5675L*2480W*2190H |
|
吸塵口尺寸及數量 Size&QTY of Dust Hood |
200*1 150*1 |